Description
Main Contents
Table of Contents
Main Contents
Preface
Caution [Before operating this machine]
About Safety
Concerning Storage
About Handling
Chapter1. Overview
1.1. Configuration and name of feeder
1.1.1. SM 8mm Tape Feeder
1.1.2. SM 12mm/16mm Tape Feeder
1.1.3. SM 24~88mm Tape Feeder
1.1.4. Feeder Base
1.2. SM Tape Feeder Standard
1.2.1. Types of SM tape feeder
1.2.2. Applicable reels
1.2.3. Applicable components
1.2.4. Table for pitch setting
1.2.5. Applicable pitch according to emboss depth
1.2.6. Feeder Dimension and Number of Occupied Slots
1.3. Reference plane for Z-axis height of SM tape feeder
1.4. IT and Non-IT Standard
1.4.1. NON-IT Function
1.4.2. IT Function
Chapter2. Operation of the Tape Feeder
2.1. Installing the Tape
2.1.1. Opening Tape Guide
2.1.2. Fixing the Tape Reel
2.1.3. Replacing the reel post cover of the 8mm large reel tape feeder
2.1.4. Installing the component tape and Exit of the carrier tape
2.1.5. Locking
2.1.6. Fixing the Upper Cover Tape
2.1.7. Setting the Pickup Point
2.2. Changing the Transport Pitch
2.2.1. 8mm Transport Pitch
2.2.2. Changing the pitch of the SM 12mm, 16mm tape feeder
2.2.3. Changing the pitch of the SM 24~88mm tape feeder
2.2.4. Changing the pitch of the 24-88mm tape feeder
2.3. Installing the tape feeder on the feeder base
2.4. Removing Feeder from Feeder Base
2.5. Changing the hanger position of the swing type large reel feeder
2.5.1. When positioning the hanger at the upper side
2.5.2. When positioning the hanger at the lower side
2.6. Spiking
2.6.1. Tools and consumables for spiking
2.6.2. Tape Connection Method (Paper Type)
2.6.3. Tape Connection Method (Emboss Type)
2.6.4. Example of poor spiking
Chapter3. Maintenance
3.1. Maintenance of the Tape Feeder
3.1.1. Lubrication and removing foreign matter
3.1.2. Removal of foreign matter on the sprocket and ratchet areas
3.1.3. Removing foreign material from probe pin terminal
3.1.4. Removal of Part Dropped from 8mm Tape (4P Feeder)
3.1.5. Table for Periodical Inspection
3.2. Table for Failure Check
3.3. Troubleshooting of Frequent Error
3.3.1. Defective component supply
3.3.2. Pitch error
3.3.3. Deviation of the pickup point (in Y direction)
3.3.4. When an Index Error Occurred
3.3.5. When the vinyl is not discharged smoothly
3.4. Feeder Registration
3.5. Service Part List
