| JUKI GLG GL Automatic Stencil Printer Parameters: |
| Item |
Parameter |
| Repeat Position Accuracy |
±0.01mm(Test data and method are available) |
| Printing Accuracy |
±0.025mm(Test data and method are available) |
| Printing Speed / Cycle Time |
<8s (Exclude Printing & Cleaning) |
| Products Chanageover |
<5Min |
| Screen Stencil Size |
737x737mm |
| PCB Size |
50X50mm-510x510mm |
| PCB Thickness |
0.4~6mm |
| PCB Warpage Ratio |
＜1%（Based on diagonal length） |
| Bottom of Board Size |
15mm（Standard configuration）, 25mm |
| Edge of Board Size |
3mm |
| Conveyor Height |
900±40mm |
| Conveyor Direction |
Left-Right; Right-Left; Left-Left; Right-Right |
| Conveyor Speed |
100-1500mm/sec Programmable control |
| Board Positioning |
Support System |
Magnetic pin/Side support block/Flexible automatic pin（optional） |
| Clamping System |
Elastic side clamping/Vacuum nozzle/Extension-type Z-direction table setting |
| Print head |
Two indepandent Motorised printheads |
| Squeegee Speed |
6~300mm/sec |
| Squeegee Pressure |
0-10kg software control（closed-loop pressure feedback）, pressure value visible |
| Squeegee Angle |
60°(Standard )/55°/45° |
| Squeegee Type |
Steel squeegee (standard), rubber squeegee, and other types of squeegee shall be customized. |
| Steel Mesh Separation Speed |
0.1~20mm/sec Programmable Control |
| Cleaning Method |
Dry-type, wet-type, vacuum-type ( Programmable combination of Cleaning methods） |
| Table Adjustment Range |
X:±3mm; Y:±7mm θ:±2° |
| Type of Fiducial Point |
Standard geometry shape of fiducial point, bonding pad / Stencil hole |
| Camera System |
Single digital camera for upward/downward vision system |
| Air Pressure |
4~6Kg/cm2 |
| Air Consumption |
Approx 0.07m3 /min |
| Control Method |
PC Control |
| Power Supply |
AC:220±10%,50/60HZ 1Φ 1.5KW |
| Machine Dimensions/Weight |
Depends on exactly model |
| Operation Temperature |
-20°C ~ +45°C |
| Operation Humidity |
30%~60% |
